Balluff BOS R254K-UUI-LS10-S4, Configuration Manual

Page: 126 / 174

38 english
Switching Counter – Auto Mode
On every rising edge of the input signal, the counter value
is increased (see Fig. 6-4).
If the counter value is less than the configured counter
limit, the counter state flag not reached is set. As soon as
the count value is greater than or equal to the configured
counter limit, the counter state flag
reached
is set. If the
count value is greater than the configured counter limit, the
count value is automatically reset (count value = one).
The count value can be reset at any time by a system
command (count value = zero).
Fig. 6-4: Switching counter – Auto Mode
6.3.3 Process Data
Object ID Name Description Direction
0x0003 (3) Switching Counter Limit not reached Switching Counter Value < Limit Input
0x0004 (4) Switching Counter Limit reached Switching Counter Value ≥ Limit Input
0x0005 (5) Switching Counter Limit exceeded Switching Counter Value > Limit Input
0x0006 (6) Switching Counter Value Switching Counter Value Input
0x0007 (7) Switching Counter Reset Reset Switching Counter Output
Tab. 6-14: Switching counter – process data
6
Secondary Device Functions (continued)
BOS R254K-UUI-LS10-S4
Photoelectric Sensors