Balluff BOS R254K-UUI-LS10-S4, Configuration Manual

Page: 147 / 174

www.balluff.com 59 english
6
Secondary Device Functions (continued)
Device Temperature
Device Temperature
contains information about the device
temperature (current value in °C), the minimum or
maximum device temperature since the last time the
device was switched on/reset (in °C) and minimum or
maximum device temperature during the lifetime of the
device (in °C).
Device Temperature Alarm Configuration
Setting of the lower threshold value (in °C) for the device
temperature warning (0x8D20) and of the upper threshold
value (in °C) for the device temperature warning (0x8D10).
6.10.4 Events
Event Code Event Type Description Device Status
0x4000 (16384) Error Temperature Fault – Overload – The device is operated
outside of the device-specific temperature limits. Risk of
device damage.
4 – Failure
0x4210 (16912) Warning Device Temperature Overrun – Clear Heat Of Source
– Risk of device damage. The device is too hot.
►
Remove heat source, provide the device with heat
insulation if necessary.
2 – Out-of-Specification
0x4220 (16928) Warning
Device Temperature Underrun – Insulate Device
– Risk
of device damage. The device is too cold.
►
Insulate the device.
2 – Out-of-Specification
0x8D10 (36112) Warning Device Temperature Upper Warning – The set upper
temperature warning threshold has been exceeded.
0 – Device is operating
properly.
0x8D20 (36128) Warning Device Temperature Lower Warning – The device
temperature has fallen below the set lower temperature
warning threshold.
0 – Device is operating
properly.
Tab. 6-51: Internal temperature – Events
BOS R254K-UUI-LS10-S4
Photoelectric Sensors