16
english
3
Configuration via Explicit Messages (continued)
3.5.2 Write IO-Link parameters
Service code Class
Instance Attribute
0x32
0x96
1 – n
1)
0x02
(Write
parameters)
1)
n: Number of ports
Tab. 3-7: Values for write IO-Link parameters
1.
Select
Source Element
and
Destination Element
as
on
page 14.
The
Source Length
must be the same length as the
parameter data to be written. In this example the
index 0x4E, subindex 0, value 0x02 are written in the
Source Element Array
(Write).
In the event of a parameterization error an error code is
displayed in the
Destination Element Array
(Read).
Fig. 3-6: Configuration
2.
In the
c
OMMunicatiOn
tab select the Ethernet module for
which parameters should be set.
Fig. 3-7: Select Ethernet module
The Explicit Messages functions are implemented
according to Volume 1: Common Industrial
Protocol Specification and Volume 2: Ethernet/IP
Adaption of CIP.
BNI EIP-508-105-Z067
Network interface
Summary of Contents for BNI EIP-508-105-Z067
