Balluff BNI EIP-508-105-Z067, Configuration Manual

Page: 75 / 88

www.balluff.com 31 english
6
WebUI/web interface (continued)
Parameter (IODD)
The Parameter (ISDU) tab page is only displayed if
a suitable IODD is uploaded for the IO-Link device
connected to the selected port. u
plOad
iOdd , see
g
eneral
i
nfOrMatiOn
.
Under p
araMeter
(iOdd) , the device identification data of
the IO-Link device is displayed in a table when the
i
dentificatiOn
tab page is selected (e.g. Fig. 6-20). The
corresponding texts are saved in the IODD.
The input values can either be read out from the IO-Link
device individually for a subindex by clicking on r
ead
or for
the entire tab page via r
ead all
. A successful request is
indicated by a green bar on the right-hand edge of the
relevant table row.
Fig. 6-20: Dialog view after clicking on r
ead all
or, for each subindex,
on r
ead
The a
pplicatiOn
S
pecific
t
ag
is an application-specific field
in IO-Link devices and, in the current example (see
Fig. 6-21), can either be read out from the IO-Link device
with
r
ead
or can be individually configured by clicking on
the gray input field with the same name and described with
w
rite
(provided the required write authorization exists). It is
also possible to enter a company-internal device name in
this field.
Fig. 6-21: Application Specific Tag
If the IODD of the IO-Link device at the currently selected
port also has parameters, these are also displayed in the
form of a table (see Fig. 6-22). Similarly to the process for
device identification data, parameter values and associated
texts from the saved IODD can be configured, depending
on the parameter, via r
ead
or r
ead all
.
If available, click on the
▼
icon to open a dropdown list
and select a value or select a value within a specific range
and confirm with w
rite
.
If there is no r
ead
button next to subindices, these indices
cannot be processed individually, but only as a complete
index.
Fig. 6-22: p
OrtS
dialog: Extract from the parameter list of an IO-Link
device with uploaded IODD after clicking on r
ead all
or
Read for individual subindices
Each changed value must be written individually
by clicking on w
rite
!
ISDU Parameter
Configuration parameters of the IO-Link device can be
read and written via the iSdu p
araMeter
option. The
parameter indices and subindices of the IO-Link device
follow the IO-Link conventions and are described in the
corresponding user’s guide.
Parameter indices and subindices can be entered both in
decimal and hexadecimal format, while data can only be
entered in hexadecimal format.
An input is confirmed with S
et
or can be rejected with
d
elete
.
Events
Under e
ventS
, you can see whether there is a diagnosis
event from the IO-Link device.
The events can be displayed in ascending or descending
order. The list of events can be updated via further options
of the e
ventS
card (see Fig. 6-23) or can be downloaded in
CSV format.
Fig. 6-23: Further options of the e
ventS
tab page
BNI EIP-508-105-Z067
Network interface