20
english
5
Display
5.1
General
With the installed display the address is displayed directly
on the devices.
The following address types are possible:
– IP address
– Subnet mask
– Gateway address
Each address consists of 4 octets.
The display also shows information about the update of
the hardware and firmware.
The display has a lock function which can be activated
from the system control. Editing is no longer possible if the
lock is set.
5.2
Address details
IP address:
192.168.1.1
Subnet mask:
255.255.255.0
Gateway address: 192.168.1.1
5.3
Control and display
1
Display
4
Address type cursor
2
Arrow button
5
Set button
3
Octet cursor
6
LEDs
Fig. 5-1: Explanation of the control panel
5.4
Display information
Cursor to select the address type
Cursor to select the octet
0
1
2
3
IP
SN
GW
IP:
IP address
3 First octet
SN:
Subnet address
2 Second octet
GW:
Gateway address
1 Third octet
0 Fourth octet
Fig. 5-2: Explanation of display
5.5
Design and symbols
In the following diagrams, a number of symbols are used
to describe the display functionality:
Symbol
Meaning
Current state
Switch
Press the Set button briefly
Press the Set button for several seconds
(≥ 3 s)
Press the arrow button briefly
Tab. 5-1: Explanation of symbols
5.6
Startup
BALLUFF
Module name
Hardware and firmware
update
Current IP
Current subnet mask
Current gateway address
BNI EIP-508-105-Z067
Network interface
Summary of Contents for BNI EIP-508-105-Z067
