Balluff BMD 1H Series, Condensed Manual

Page: 29 / 98

11
ÏÏÏƖº¹ÄÄÍŰƖ»ÇÅ
5 Set up with the display and adjustment module
5
4
4
5
9
-E
N-1
7
0
7
1
2
5 Set up with the display and adjustment
module
5.1 Insert display and adjustment module
The display and adjustment module can be inserted into the sensor
¹Æ¼Ê½ÅÇν¼¹¿¹Áƹ̹ÆÑÌÁŽƖÇÍ»¹Æ»ÀÇÇ˽¹ÆÑÇƽǾ¾ÇÍʼÁŰ½Ê
-
ent positions - each displaced by 90°. It is not necessary to interrupt
the power supply.
Proceed as follows:
1. Unscrew the housing lid
2. Place the display and adjustment module on the electronics in the
desired position and turn it to the right until it snaps in.
3. Screw housing lid with inspection window tightly back on
Á˹Ë˽źÄÑÁË»¹ÊÊÁ½¼ÇÍÌÁÆʽνÊ˽Çʼ½ÊƖ
The display and adjustment module is powered by the sensor, an ad-
ditional connection is not necessary.
Fig. 8: Insertion of the display and adjustment module with single chamber
housing
Note:
¾ÑÇÍÁÆ̽ƼÌÇʽÌÊÇŲÌÌÀ½ÁÆËÌÊÍŽÆÌÏÁÌÀ¹¼ÁËÈĹѹƼ¹¼ÂÍËÌŽÆÌ
ÅǼÍĽ¾ÇÊ»ÇÆÌÁÆÍÇÍËŽ¹ËÍʽ¼Î¹ÄͽÁƼÁ»¹ÌÁÇÆƓ¹ÀÁ¿À½ÊÄÁ¼ÏÁÌÀ¹Æ
inspection glass is required.