Baldan SPDE CXP, Instruction Manual

Page: 57 / 98

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP
- 57
Instruction Manual
ADJUSTMENTS OF THE LINES
The limiting rings are used to limit the course of the piston, causing the disc
lift bracket to compress the springs by giving the pressure required. Limiters
are provided in the following sizes:
The compactor wheel (1) is used to close the groove sideways, causing the soil to be
immediately placed on the seed, avoiding much compaction, facilitating germination
and development of the plant. To adjust the pressure of the “V” compactor wheels, pro-
ceed as follows:
The depth limiter flange (1) is mounted on the double disc (2) and is intended
to determine the depth of position of the fertilizer and seed.
LIMITERS
ADJUSTMENT OF THE “V” COMPACTOR WHEEL
DEPTH LIMITER FLANGE
Make the same adjustment for all “V” compactor wheels and consider the soil
type, seed and depth of planting, so as not to affect the free emergence of the
plants.
ATTENTION
1
The limiters can be used as follows:
25, 50 and 75mm limiting of the
course of the piston.
IMPORTANT
ATTENTION
Place the limiting rings on both sides
of the seeder to avoid damage to the
chassis.
02 Limiting rings of
ø 51 x 49,5 mm
02 Limiting rings of
ø 42 x 49,5 mm
02 Limiting rings of
ø 42 x 25 mm
Limiter code
53480500128
Limiter code
53480500098
Limiter code
53480500063
MORE PRESSURE:
Remove the lock (2), pull the pin (3) out
and lock again.
LESS PRESSURE:
Remove the lock (2), push the pin (3) in
and lock it again.
2
ATTENTION
The depth limiting flap (1)
has 3 models as shown on
page 75.
2
1
3