Baldan SPDE CXP, Instruction Manual

Page: 61 / 98

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP
- 61
Instruction Manual
OPERATION
COUNTERWEIGHTS
The
SPDE CXP
has counterweights (1) which are placed in the rear tube (2) of the
seeder. These counterweights have the purpose of aiding in penetrating of hard
terrain, especially when there is a tendency to skid the wheels. Weighing 14.6 kg
each, the counterweights (1) can be removed or placed easily.
To place or remove counterweights (1), proceed as follows:
1- Loosen the bolts (3), plain washers (4), lock washers (5) and nuts (6), remove the
platform plate (7). Then remove the bolts (8), plain washers (9) and plate (10).
2- Then, insert one on each side, another in the middle, and so on. Finish by
assembling the components again.
Models
Number of
Counterweights
Total (KG)
SPDE CXP 16 234
SPDE CXP 20 292
SPDE CXP 24 350
1
Do the same for the other wheel support (6) and for all the oscillating depth
wheels.
During sowing, check the depth a few times, especially when there is moisture
variation.
ATTENTION
IMPORTANT
3
9
8
10
6
4
5
2
1
7