Baldan SPDE CXP, Instruction Manual

Page: 80 / 98

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP
- 80
Instruction Manual
OPERATION MANUAL ETD (ELECTRONIC DOSING TABLE) - OPTIONAL
ETD MANUAL
• Mounting the magnets on the main axis • Mounting the speed sensor
The magnets (1) must be installed on the planter’s primary axis, after
the shutdown ratchet, as this will not count hours and hectares when the
machine is in transport. A magnet must be installed on each face of the shaft (3),
securing them with two nylon clamps (4) so that they are properly fixed and
positioned (4).
Mount the sensor (1) on the support (2) fixing by the nuts (3) according to
the image (4).
1
1
3
2
4
3
2
4