Baldan SPDE CXP, Instruction Manual

Page: 21 / 98

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP
- 21
Instruction Manual
ASSEMBLY
4- Insert the coupling header for the side
transport (7) into the coupling (5), throu-
gh the pin (8) and lock (9).
5- Engage the lower arm of the tractor on
the support
“A”
of the header through
the pin (10) and latch (11).
6- Engage the 3rd point of the tractor (12)
on the support
“B”
of the header throu-
gh the pin (13) and lock (14).
7- Finally with the aid of the regulating le-
ver
“C”
engage the lower arm of the
tractor on the pin “D” of the head.
MECHANICAL SIDE TRANSPORT ASSEMBLY - OPTIONAL
To assemble the mechanical side transport
(optional) on the SPDE CXP , Proceed as
follows:
1- First, remove the nuts (1) and replace
the bolts (2) of the wheel (3) by the bolts
(4) of the package.
2- Then engage the coupling (5), replace
the nuts (1) and retighten them.
3- Finish by placing the locking nuts (6) of
the package.
4
5
6
1
2
3
14
13
7
9
8
5
12
11
6
“B”
“A”
“D”
8- Attach the side transport bra-
cket (15) to the mount (16)
through the plate (17), screws
(18) and washers and nuts (19).
Then mount the rod with the
tire (20) through the pin (21)
and latch (22).
ATENTION
To lower or lift the side trans-
port bracket (20), raise the see-
der with the tractor hydraulics.
9- After engaging the tires, lift the head (23) by locking it
with the pin (24) and the latch (25) for the side transport
of the seeder.
“C”
16
20
21
18
19
15
17
22
24
25
23