Baldan SPDE CXP, Instruction Manual

Page: 67 / 98

BALDAN IMPLEMENTOS AGRÍCOLAS S/A.
SPDE CXP
- 67
Instruction Manual
MAINTENANCE
To tension the chain, proceed as follows:
1
Check the chain tension dai-
ly 1, the normal loosening
should be +/- 1cm in their
center.
LUBRICATE EVERY 200 HOURS OF WORK
Periodically lubricate the double disc hubs (1) approximately every 200 hours
and at the end of the harvest, to do this proceed as follows:
1- Remove the retention
ring (2) of the hub (3).
Examine the bearings,
if there are any gaps,
adjust through the
castle nut (4). Intro-
duction new grease
in the cap (5). Repla-
ce the cover (5) on the
hub and secure it with
the retaining ing (2).
3
5
1
4
2
1- Loosen the nut (1), slide the tensioner
(2) by adjusting the chain tension (3).
Then retighten the nut (1).
CHAIN TENSION
Before removing the cap (5),
clean it on the outside so that
it does not contaminate the
inside.
Do not over-grease, respect
the greasing intervals.
ATTENTION
ATTENTION
OSCILLATING TENSIONER
The tensioner (1) is of the torsion
type (2) for even greater tensioning.
If necessary on the tensioner, loosen
the spring, turn the spring coupling
shaft (2) to the shaft rosette and rest
the inner nut (3).
2
1
3
4
2