32
INSTALLING AND LAUNCHING THE FMS SOFTWARE
The system configuration is done by using this FMS Software. Only some special functions like the operation
modes are set at the Master Keypad�
The software provides the ability to set work orders, and assign a product and a quantity to it.
All dispense results will be collected and saved in a work order list (W.O. Report). Several filters are available to
select the desired information. The result can be exported to a comma-separated value (CSV) file format.
System Requirements
Windows® 7, 8, 8.1, 10, Server 2012 or higher, 64 and 32 bit compatible
• 9-Pin RS-232 serial interface (COM) port
FMS Software Description
Before beginning the installation, please be sure your Windows user profile has the appropriate rights to install the
software properly (particularly Windows XP).
Insert the setup CD ROM into your CD ROM drive�
If the Installer does not launch itself after a short period, open it manually by double clicking on your CD Drive in
your My Computer folder. Select the AutoMenu file.
The installer menu will appear:
The installer menu provides several options:
• Server – installs the server and all server
components. This will be the location where
all the data is stored and where the client
machine will go to access and update work
orders, tank levels, etc.
• Client – installs the client and all client
components. This will have to be installed
on every machine you would like to run the
software on
• Exit closes the installer
Summary of Contents for Fusion 3110-027
Page 4: ...4 System Overview...
