17
The Dispense Keypads are responsible for the communication with the RF meters. The user starts a work
order from the keypad. After the dispense operation has been completed the keypad will receive the actual
amount dispensed from the meter. The Dispense Keypad then sends the dispense results to the Master
Keypad�
The system can handle up to 36 Dispense Keypads. Up to 24 meters can be assigned to each keypad but
each meter can only be assigned to one Dispense Keypad.
System Version
V3.00 2.4 GHz
The standard screen shows the system software version
number. The display will alternate between the standard
screen and the Enter Pin Number screen. The Enter Pin
Number screen is used to access the supervisor menus.
Enter Pin No.
- - - -
NOTE
: An “N” displayed in the lower left-hand corner of the
system version screen indicates a Radio Network error� See
“Radio Status” on page 23 to check the source of the error.
Settings Overview / Supervisor Menus
The following configuration options are only available at the Dispense Keypad.
The default value for the Supervisor PIN is 0001.
V3.00 2.4 GHz
N
Dispense Keypad
V3.00 2.4 GHz
M
V3.00 2.4 GHz
O
NOTE
: An “M” displayed in the lower left-hand corner of the
system version screen indicates that the Dispense Keypad
has joined an RF network, but cannot currently contact the
Master Keypad for WO authorization.
NOTE
: An “O” displayed in the lower left-hand corner of the
system version screen indicates that the Dispense Keypad
is in System Override mode. See “System Override (SYS)
Menu” on page 24 for details.
Enter a user PIN to start a work order or the supervisor PIN
to enter the supervisor menus (the default PIN is 0001).
Summary of Contents for Fusion 3110-027
Page 4: ...4 System Overview...
