9
Dispense Screen
The dispense screen is used to enter work orders into the system. This would be the
normal operation screen used.
Operation:
1. Enter the work order number
2. Select the desired fluid type from the pull down menu
3. Enter the fluid quantity
4. Click the Send Button
To abort the Work Order entry in process, click the reset button.
Note: The quantity is based on the Tank Unit. The meter must be programmed to dispense
in the same unit as the tank.
The queuing feature of the system allows for work orders to be entered into the system and
have the dispense performed at some point in the future. There is no need to pre-determine
or select the hose to be used for dispense before it is going to occur. The operator will
select the work order to be worked on from the zone keypad. The hose selected at that time
will be verified for the correct fluid and the dispense quantity will be sent to the meter.
See the Zone Keypad SBxxxx for complete dispense operation.
