31
tree click the delete button next to the keypad to be removed. The keypad will be removed
from the tree only.
After the dispense keypads are selected the next step is to select the tanks that are to
be associated to the individual dispense keypad.
To select a tank under a dispense keypad use the pull down list next to the
insert a tank
branch
. If no tank is available the pull down list will not be present. You must select the tank
under each keypad that you want it associated to. To remove a tank from the network tree,
click the delete button next to the tank to be removed. The tank will be removed from the tree
only.
NOTE: You must associate each tank to each Zone keypad where a hose/meter will be
used to dispense fluid from that tank.
The next step is to associate the hose/meter that is going to be accessed from the
Zone keypad. The key thing to remember is that a hose/meter id can only be
associated to one Zone keypad. When the hose/meter is selected from the list it will no
longer be included in the pull down list. In system operation a hose/meter can only be
selected from the Zone keypad it is associated to.
To add a hose/meter to the network tree, use the pull down next to the
insert a hose
on the
screen and click the add button. When a hose id is selected it will be removed from the list. If
no hoses are available the pull down list will not be present. To remove a hose from the net-
work tree click the delete button next to the hose to be removed. The hose will be removed
from the tree only.
Notes:
1. After an entity is added to the network it is no longer available for selection through the
pulldown menus.
2. When an entity is deleted from the network it will again appear for selection through the
pulldown menus.
3. The Tank level will be displayed on the network tree in the unit of measure of the
dispense unit selected.
