27
To add a new tank, select the unit of measure for dispensing from the new unit pull down menu
just below the list of tanks. Then enter the tank capacity and click the create button. The tank
capacity is a 5/3 format.
To change the current level of a tank, type in the level in the new level box and click modify.
The actual level of the tank can be update only after the tank has been associated with a fluid.
The tank level is a 5/3 format.
To delete a tank click on the delete box next to the tank to be remove and it will be deleted. A
tank that is associated with a fluid cannot be deleted.
Hose/Meter Screen
Up to 250 Meters can be defined in the system. Hose and Meter are synonymous terms.
The Hose id is a four-digit number controlled by the system and is assigned when a new Meter
is added.
The Meter address is found on a tag inside the battery compartment
of the meter. The format of the address is x.xxx.xxx.xxx and is a 10-
digit number. When the address is entered the decimal points must
be entered in the correct position as found on the address tag.
To Add a meter to the system enter the meter address in the new hose
address box and click the create button. The system will assign it the Hose
id number automatically.
To delete a meter click the delete box next to the meter to be removed from
the system. A meter that is associated in the network tree cannot be deleted.
Note: A meter that is associated in the network tree cannot be modified. To replace a
meter that currently is in the system requires that you first remove it from the network
tree. You can then modify the current hose address with the address of the replacement
meter. Then you will need to go back to the network tree and add the hose back into the
network tree.
