81
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417, 834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42211 C
panel stops operating 44
panels, TP600/TP400 44
panels, TP900/TP800 44
Panel, Unlocking the 58
Parts, Recommended 7
PASS should appear 61
period, time-out 56
Pins, Sensor 49
polling 56
power connection instructions 2
Preferences 77
pressure, Water under 52
prevent unwanted use 58
Priming Mode 68, 77
Problem 22
problem, blower 19
problem, board 49
problem, flow 21
problem, pump 19
problem, sensor 49
problem, suction 68
programmable circ pump 56
Programming 77
Programming Reference 8
properly reset the GFCI 61
Protection, Electrical 19
protection, freeze 56, 59
Protection, Freeze 68, 77
Pump, Circ 77
pump, circulation 77
pump problem 19
pump, programmable circ 56
Pumps, Troubleshooting 22
Pump Suction Blockage* 68
R
Range, High Temperature 54
Range, Low Temperature 54
Ranges, Acceptable Heater Amperage
Draw 23
Ranges, Acceptable Heater Ohm (
1
) 23,
34
Ranges, Amperage Draw 23
Ready Mode 56
reason, Miswiring of the spa is the most
common 19
receiver, Dolphin 74
Receiver, IR 74
Receiver, RF 74
receiver’s connector 74
Recommended Parts 7
red TB1 terminal 18
Reduced, Heater Flow is 68
Ref. Card 40947 8
Reference, Programming 8
reinstalling the board 51
release tab 50
REMOTE 74
Remote, DolphinTM 74
removing a heater 52
Replacment Sensor 49
Required, Service Tools 7
reset, Messages that can be 62
reset the GFCI 61
Resistance, Troubleshooting 34, 35
Restricting Operation 58
RF Receiver 74
right arrow 62
RUN PMPS PURG AIR ---- 68
S
S1 44
S1, DIP switch positions of 67
Safety Trip 68
Screen, Spa 56
Scrolling TP400/TP600 Messages 68
scroll, messages will 68
second filter cycle 56
Sensor A 44, 60
Sensor, A/B 44
Sensor A Fault 62
Sensor A: M031 62
sensor, Auxiliary freeze 56
Sensor B 44, 60
Sensor Balance is Poor fault 69
Sensor B Fault 62
Sensor B: M032 62
sensor circuit has failed 62
sensor connector 41
Sensor, High-Limit 23
Sensor Location BP500 41
Sensor Pins 49
sensor problem 49
Sensor, Replacment 49
sensor set 21, 49
sensor temperatures 21
Sensor Wires 7
Service Calls 7
Service Tools Required 7
SETP (Current Setup) 67
set, sensor 21, 49
Set Temperature 58
Settings, Configuration 44
Settings Lock 58
setup, Change the 44
Set Up Code 75
set up codes 75
setup configurations 44
Setup, Current 44
Setup Number 45
Setups, Software 44
shimmer 20
SIG 67
Signature, Configuration 67
Simplified Menus 8, 44, 72
slice valves 52
slow-blow fuses 19
software compatability 8
Software ID 59
software in the topside control panel 67
Software Self Identification 77
Software Setups 44
software, test 62, 69
Spa Address 75
Spa Guidelines 76
spa is shut down 68
Spa Screen 56
spa to filter continuously 21
spike, nuisance 19
Index
