74
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417, 834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
6/22/13
AUX
J8
AUX
J36
MAIN
J34
MAIN
J35
MAIN
3A 250V
J8
J8
J8
J15
J14
J38
HTR1
HTR2
HTR3
REMOTE
J31
J30
J40
10
S1
LIGHT
A/V HO
T
J18
PUMP 2
J107
RLY 7/8
J108
RLY 9/10
J23
SERIAL
J29
SENSOR
AUX
TEMP
J28
AUX FRZ
A
SENSOR
B
THE DOLPHIN
TM
REMOTE
The Dolphin Remote works much the same way as your en-
tertainment remote at home does; yet, it’s designed to control
pumps, blowers, and any option that you have on your pool or
spa--including entertainment equipment.
HOW THE DOLPHIN WORKS
The Dolphin communicates with a Dolphin RF Receiver (or IR
Receiver). The receiver is wired into the Control System.
Mount the
1.
Dolphin receiver module in a vertical position
with the molded arrow pointing up.
Plug the
2.
receiver’s connector into the 6-pin connector J40
labeled REMOTE located within the Control System box.
In order for the Dolphin to communicate, it must be assigned
3.
an “address” that the Control Center and Dolphin recog-
nize, and allows both the Dolphin and specific equipment
(blower, jets, or stereo for example) to “talk” to each other.
(The factory default is zero, or no address.)
When set to 0, no addressing is used. Use this setting for
4.
a Dolphin III, which is factory set for no address by default.
The Dolphin has a total of eight addresses: zero, and 1-7.
Dolphin
BP SPA
CONTROL SYSTEM
Dolphin
Receiver
Supplemental Information
Optional Balboa Dolphin
TM
Remote
-
