Baker D30R, User'S Manual & Operating Instructions

Page: 12 / 142

D30R Users Manual
12
Do Not Touch Test Leads while test is in Progress!
71-023 Rev C 5/8/2007
This product is intended to operate from a power source that applies 85-264
VAC RMS 50/60Hz between the supply conductor or between either supply
conductor and ground.
Ground the Product
This product is grounded through the grounding conductor of the power cord.
To avoid electrical shock, plug the power cord into a properly wired receptacle
before connecting the product test leads.
Terms & Symbols
•
Caution statements identify conditions or practices that could result in
damage to the equipment or other property.
•
Warning/Danger statements appearing in boxes identify conditions or
practices that could result in personal injury or loss of life.
•
Notices that are bolded indicate operational cautionary information.
•
Notes:
are important information and hints on the operation of the
equipment.
Warranty Notes
Important notice concerning the Warranty and Repairs
The warranty is
Void
if tester is shipped in any container other than the original
container it was shipped in
or
factory specified packaging. For replacement
factory specified packaging and instructions for proper shipment of the tester see
the Shipment section at the end of this chapter. Also, be sure to complete the
Warranty Return Form
when sending the tester to Baker Instrument
Company.
Danger from Loss of Ground
Upon loss of the protective ground connection, all accessible
conductive parts, including knobs and controls that may appear to be
insulated, can render an electric shock!