Baker D30R, User'S Manual & Operating Instructions

Page: 75 / 142

D30R Users Manual
75
Do Not Touch Test Leads while test is in Progress!
71-023 Rev C 5/8/2007
test voltage of 4000V, a setting of 500 Volts/Div would result in a wave pattern
with 8 divisions amplitude which would go off the screen.
10.
Watch the surge waveform display while the voltage is increasing looking
for flickering display, a drop in amplitude or a jump of the waveform to the
left of the display.
11.
Once the test voltage of 1960V is reached, stop pressing the output control
button and release the Test button.
12.
Store the results for Lead 1 in one of the 10 test records with the following
procedure:
a. Press the store Function Key above the top of the screen.
b.
Select the record to store the data in by pressing the Up / Down
Function Keys to highlight the desired record and pressing Select.
c.
Highlight Lead 1 on the next screen.
d.
Again press select to load the data into the tester’s memory.
Fig 7-4: Save Surge Data Lead 1
10. Move the Test Lead Selector Switch to Lead 2.
11.
Repeat steps 5 through 8 for lead 2, and save the data in the tester’s memory
as was done in step 12.