Baker D30R, User'S Manual & Operating Instructions

Page: 113 / 142

D30R Users Manual
113
Do Not Touch Test Leads while test is in Progress!
71-023 Rev C 5/8/2007
Recall
RECALL is used to retrieve measurements from internal memory to the display.
Choosing RECALL reveals a list of memory locations available for resistance,
HiPot and surge tests. Ten available Record memory locations are then listed on
the display.
Choosing RECALL also reveals a submenu, with choices that correspond to the
four function keys above the display.
Recall Record Submenu Options
SUMMARY UP DOWN SELECT
Press
SUMMARY to
display the
Resistance data,
Surge data in all
three leads, the
Meg-ohm, HiPot,
and the PI data
stored in the
Record the cursor
is presently on.
Resistance, all
three surge wave
patterns, HiPot,
and PI results will
be displayed
simultaneously
and operation will
be returned to the
main menu. Up moves the
cursor up the
Record list. Down moves the
cursor down the
Record list. Press SELECT to
choose the
Record that the
cursor is
presently on.
In Surge Mode:
Press SELECT to
reveal the next
menu for lead
selection or to
cancel a selection
(see next page).
In HiPot Mode:
Press SELECT to
recall HiPot
and/or PI data
from the Record
and return to the
main menu.
Recall Resistance Data
If the tester is currently in Resistance mode, the tester will display the recorded
Resistance data for the selected record.