Baker D30R, User'S Manual & Operating Instructions

Page: 18 / 142

D30R Users Manual
18
Do Not Touch Test Leads while test is in Progress!
71-023 Rev C 5/8/2007
Front Panel Controls
1) PRINTER PORT
Parallel port for printing waveforms and summaries displayed by the
Digital Tester. This port may also be used for interfacing with the
Motor Test Acquisition for Windows program (MTA for Windows) on
a personal computer.
2) FUNCTION KEYS
Function key for data collection, recall, and printing of tests. The keys
correspond to choices provided on the CRT display below them. See
the chapter on Storage and Print Capabilities, for a detailed description
of the tester’s storage capablility.
3) CRT DISPLAY
The Cathode Ray Tube (CRT) is the location where the tester displays
test information. At the Top, menus corresponding to the four function
keys above the CRT are shown. The main portion of the screen displays
the waveforms being measured and/or recalled with corresponding
graticules for reference. The bottom portion shows the volts/division
for the waveform, the name of the test on display, and the micro-
seconds/division (micro-amps/division for hipot tests). When using the
function keys, the screen will display options pertinent to the storage,
recall, and print capacities of the unit. Error messages are also
displayed here.
4) LINE IN
The external AC power-supply plug.
5) ON/OFF
The on off switch for the unit. On/off switch is combined with the AC
power entry and a fuse.
6) TEST
The TEST button activates the high voltage output of the tester. One of
the selected modes, Surge, or Hipot will be enabled and a voltage will
be impressed on the device being tested. This button automatically
disengages when released.