COMPONENT DESCRIPTION AND REPLACEMENT
PERIPHERALS
WBPEEUI220760A0
6 - 33
6. Remove the four screws mounting the optical disk to the
mounting plate.
NOTE: When replacing the unit, verify that the SCSI bus address is
the same as the address in Step 3.
PERIPHERALS
in Section 3 for a description of the
peripheral equipment. Refer to the manufacturer’s documenta-
tion for replacement information.
Figure 6-25. Driver Cabinet Optical
Disk Drive Removal
OPTICAL DISK DRIVE
MOUNTING SCREWS (2)
REAR VIEW
TP36218A
CAUTION
Remove power from all peripheral equipment and the console
before installing or removing peripheral equipment. Equipment
damage may result.
Make sure that all voltage labels and voltage switch settings on
the peripheral devices, power supply and power entry panel
show the correct operating voltage. Equipment damage may
result if the incorrect voltage is connected. Make sure the con-
sole main power circuit breaker is off before changing operat-
ing voltage settings or equipment damage may result.
ATTENTION
Coupez l´alimentation des périphériques et de la console avant
d´installer ou de retirer des périphériques, sinon l´équipment
risque de subir des dommages.
Assurez-vous que toutes les indications de tension et tous les
réglages de tension sur les périphériques, le bloc d´alimenta-
tion et le panneau d´entrée des alimentations correspondent
bien à la tension de service. Une tension incorrecte risque
d´endommager l´equipment. Assures-vous que le disjoncteur
d´alimentation principal de la console est étient avant de modi-
fier les réglages de tension de service afin d´éviter d´endom-
mager l´équipment.
