Baileigh TS-1040E 30, Operator'S Manual

Page: 14 / 52

11
11
Fence Information Fence Size (L x W x H)
34-1/4" x 3-1/8" x 2-1/2"
(870 x 80 x 63mm)
Miter Gauge
Information
Miter Gauge Slot Type T-Slot
Miter Gauge Slot Type (W x H) 3/4" x 3/8" (19 x 9.5mm)
Other Information Dust Port Size 4" (102mm)
INTENDED USE
Table saw and the workpiece guide equipment supplied with it are intended to be used
exclusively for the following purposes:

Laminated and unlaminated board materials (e.g. chipboard, coreboard, MDF board, ...)

Solid wood

Gypsum plasterboard, Cardboard, Veneer with a suitable clamping device.

Dimensionally stable plastics (thermoset plastics, thermoplastics). Sawing these materials
does not normally involve any risks in respect of dust, chips, and thermal degradation
products.
Tools:
The chosen saw blade must be suitable both for the specific work cycle and for the specific
material.

Only circular blades which are solid chrome vanadium (CV) or tungsten carbide tipped (TCT)
and have a diameter of
10” (255mm), arbor size 5/8” (16mm), as well as a maximum width of
13/16” (20mm) are allowed for the main saw.

Saw blades made of high-alloy high-speed steel (HSS) are not allowed to be used.

Saw blades and their fixing devices shall conform to EN 847-1:2005.
Note :The photos illustrations in this manual are representative only and may not
depict the actual color, labeling or accessories and may be intended to illustrate technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileighindustrial.com, Phone: 920.684.4990, or Fax: 920.684.3944.