Baileigh TS-1040E 30, Operator'S Manual

Page: 13 / 52

10
10
SPECIFICATIONS
Dimensions
Weight 370 Lbs (168kg)
L x W x H
60" x 38" x 40"
(1524 x 965 x 1016mm)
Foot Print (L x W) 21-1/2" x 19-1/2" (546 x 495mm)
Electrical
Switch
Locking Paddle Switch with
Overload Protection
Switch Voltage 240V
Motor
Type TEFC Capacitor Start Induction
Horsepower 2hp (1.5kw)
Voltage 220V
Phase Single
Amps 10A
Speed 3450 RPM
Cycle 60hz
Power Transfer V-Ribbed Belt Drive
Blade Information
Maximum Blade Diameter 10" (255mm)
Riving Knife/Spreader, Thickness 0.086" (2.2mm)
Required Blade Body, Thickness 0.063"-0.079" (1.6-2.0mm)
Required Blade Kerf, Thickness 0.094"-0.118" (2.4-3.0mm)
Maximum Width of Dado 13/16" (20mm)
Blade Tilt Left 0-45°
Arbor Size
5/8“ (16mm)
Arbor Speed 3550 RPM
Arbor Bearings Sealed & Permanently Lubricated
Cutting Capacities
Maximum Depth of Cut At 90° 3-1/8" (80mm)
Maximum Depth of Cut At 45° 2-3/16" (56mm)
Maximum Rip To Right of Blade -
Standard
30" (762mm)
Maximum Rip To Left of Blade 12" (305mm)
Table Information
Floor To Table Height 34" 864mm)
Main Table (L x W x T)
20" x 27" x 1-1/2"
(508 x 686 x 38mm)
Table with Extension Wings (L x W) 40" x 27" (1016 x 686mm)
Front of Table To Center of Blade 17-1/4" (438mm)
Front of Table To Blade, Maximum Cut 12-1/4" (311mm)