9
9
SAFETY PRECAUTIONS (cont.)
36.
Never leave machine running unattended. TURN POWER OFF
. Don’t leave machine until
it comes to a complete stop.
37.
Make sure machine is disconnected from power supply
while motor is being mounted,
connected or reconnected.
38.
Saw Appropriate Material.
Only use this saw for natural wood stock and wood stock
products such as particle board, plastics, laminates, and medium-density fibre board (MDF).
DO NOT try and cut metal, glass, ceramics, or products containing asbestos or lead paint.
Some of these materials contain hazardous dust and can cause severe respiratory
problems.
39.
Warning
: The dust generated by certain woods and wood products can be injurious to your
health. Always operate machinery in well ventilated areas and provide for proper dust
removal. Use a wood dust collection system whenever possible.
40. A push block and/or a push stick must be used if
the workpieces is less than
5” (127mm) to prevent
your hands from getting too close to the saw blade.
Push block must be used to cut narrow workpieces
and, when necessary, to push the workpiece
against the fence, a push block can be easily made
by the operator.
EMERGENCY STOP
In the event of incorrect operation or dangerous conditions, the machine can be stopped
immediately by pressing the
ON/OFF
switch. Remove the Safety Lockout Key insert to prevent
unauthorized startup.
Summary of Contents for TS-1040E 30
Page 41: ...38 38 TABLE SAW BODY BREAKDOWN...
Page 43: ...40 40 TRUNNION ASSEMBLY BREAKDOWN...
Page 46: ...43 43 BLADE GUARD BREAKDOWN...
