37
37
BLADE DOES NOT COME UP TO SPEED
1. Extension cord too light or too long.
2. Low house current.
3. Motor not wired for correct voltage.
1. Replace with adequate size extension cord.
2. Contact your electric company.
3. Refer to motor and /or nameplate.
MACHINE VIBRATES EXCESSIVELY
1. Table not mounted securely to cabinet
stand.
2. Stand is on uneven floor.
3. Damaged saw blade.
4. Bad V-belt(s).
5. V-belts not tensioned properly.
6. Bent pulley.
7. Improper motor mounting.
8. Loose hardware.
1. Tighten all mounting hardware.
2. Reposition on flat level surface.
3. Replace blade.
4. Replace V-belt(s).
5. Adjust V-belt tension.
6. Replace pulley.
7. Check and adjust motor mounting.
8. Tighten all nuts, bolts and set screws.
BLADE DOES NOT RAISE OR TILT FREELY
1. Sawdust or dirt in raising or tilting
mechanisms.
1. Brush or blow out loose dust or dirt.
Summary of Contents for TS-1040E 30
Page 41: ...38 38 TABLE SAW BODY BREAKDOWN...
Page 43: ...40 40 TRUNNION ASSEMBLY BREAKDOWN...
Page 46: ...43 43 BLADE GUARD BREAKDOWN...
