Baileigh TS-1040C, Operator'S Manual

Page: 14 / 84

11
11
SPECIFICATIONS
Blade
Maximum Blade Diameter
10” (10” 40T included)
Riving Knife/Spreader Thickness 0.09 in. (2.3mm)
Required Blade Body Thickness 0.078 in. (2mm)
Required Blade Kerf Thickness 0.118 in. (3mm)
Maximum Width of Dado
13/16” (21.6mm)
Blade Tilt Left 0-45 Deg.
Arbor Size
5/8” (15.875mm)
Arbor Speed 4000 RPM
Cutting Capacities
Maximum Depth of Cut At 90 Degrees 3-
1/8” (79.3mm)
Maximum Depth of Cut At 45 Degrees 2-
1/4” (57mm)
Maximum Rip to Right of Blade
30” (762mm)
Maximum Rip to Left of Blade
12” (305mm)
Table
Floor to Table Height 36-
1/2” (927mm)
Table Dimensions (W x D x T)
40” x 25-1/4” x 1-1/2” (1016 x 641 x 38mm)
Distance Front of Table to Center of Blade 13-
1/2” (343mm)
Distance Front of Table to Front of Blade 8-9/16
” (218mm)
Fence
Fence Dimensions (L x W x H)
28” x 1-5/8” x 2-1/4” (711 x 41 x 57mm)
Fence Rail Type Extruded Aluminum
Fence Rail Dimensions (L x W x H) 54-
3/4” x 2-3/4” x 1-3/4” (1391 x 70 x 45mm)
Miter Gauge
Miter Gauge Slot Type T-Slot
Miter Gauge Slot Dimensions (W x H)
3/4" x 3/8” (19 x 9.5mm)
Electrical
Power Requirement 110V / 220V, 1Ph, 60Hz, (prewired 110V)
Minimum Circuit Size 15A@110V, 15A@220V
Switch ON/OFF Toggle with Safety Lock Tab
Switch Voltage 110V/220V
Cord 6 ft. (182.88cm) @ 14 AWG
Included Plug Type NEMA 5-15 for 110V
Recommended Plug/Outlet Type NEMA 6-15 for 220V