■
STOCK No. 64600
PART No.VMS/KD
•INSTRUCTIONS•
03/2001
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS
THOROUGHLY BEFORE USE.
UNDERSTANDING HOW THIS MACHINE WORKS AND SETTING IT
CORRECTLY IS FUNDAMENTAL TO OBTAINING
A SATISFACTORY RESULT.
MITRE SAW
Page 1: ...ART No VMS KD INSTRUCTIONS 03 2001 IMPORTANT PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USE UNDERSTANDING HOW THIS MACHINE WORKS AND SETTING IT CORRECTLY IS FUNDAMENTAL TO OBTAINING A SATISFACTORY RESULT MITRE SAW ...
Page 2: ...arm 8 Pivot pin 9 Plated cursor screw 10 Cursor 11 Blade tensioning nut 12 Pivot screw 13 Saw table 14 Saw frame handle 15 Saw frame guide bar carriers 16 Saw blade 17 Saw frame carriers 18 Saw frame assembly Specification Max cutting width clamped at 45 110mm Max cutting width clamped at 90 160mm Max cutting height 120mm Blade length 550mm Blade width 45mm Table length 400mm Max reach of adjustab...
Page 3: ...e vice clamp can be mounted on the left or right hand side of the saw table front for holding workpieces securely The adjustable length stop can be mounted at either end of the saw table and set for the required length of cut 90 45 36 30 22 5 ...
Page 4: ...saw and the angles with some scrap timber to ensure the machine is assembled correclty and cutting true SPARE BLADES Spare blades are available for this Mitre Saw Draper Stock No 60506 14tpi 60507 18tpi 60508 24tpi DRAPER TOOLS LIMITED Hursley Road Chandler s Ford Eastleigh Hants SO53 1YF U K Helpline 023 8049 4344 Sales Desk 023 8049 4333 General Enquiries 023 8026 6355 Fax 023 8026 0784 http www...
