Baileigh SH-8008HD, Operator'S Manual

Page: 22 / 60

19
19
Item Description Function
A Blade Gap Adjusting Handle Adjusts gap according to material thickness
B Fluorescent Light Green light projects shadow line on material
C Bearing Block (Front) Consult Factory Before Adjusting
D Material Support Arm Supports larger sheets of material
E Table with Ball Transfer Allows for easy movement of material
F Hydraulic Hold Down Cylinders Grip the material before shearing
G Oil Tank Reservoir for hydraulic fluid
H Squaring Arm Keeps material perpendicular to the blade
I Electrical Enclosure Houses the electrical components
J Footswitch Pedestal Operator can relocate as needed
K Hand and Finger Guard Guards hands from blades and hold downs
L Hydraulic Oil Shut-off Valve Controls oil flow to manifold
M Oil Site Gauge Shows level of oil in tank
N Hydraulic Oil Fill Cover Remove cover to fill tank or access strainer
O Emergency Stop Button Press to stop all machine functions
P Disconnect Switch Controls main power to the shear
Q Main Shear Cylinders Together they raise and lower the upper blade
R Bearing Block (Upper) Consult Factory Before Adjusting
S Bearing Block (Lower) Consult Factory Before Adjusting
T Manifold Block Distributes hydraulic oil to selected component
U Motor 15hp (11.2kw) Powers the hydraulic pump
V Hydraulic Pump Pressurizes hydraulic oil for cylinders
W Limit Switch Rake angle upper limit
X Proximity Switch Rake angle center position
Y Proximity Switch Rake angle lower limit
Z Limit Switch Shear blade at down position
AA Limit Switch Shear blade at up position
AB Hold Down Valve Controls hydraulic oil to all hold downs
AC Hydraulic Oil Shut-off Valve Controls oil flow to pump inlet