Baileigh SH-8008HD, Operator'S Manual

Page: 17 / 60

14
14
INSTALLATION
Levelling
The machine should be sited on a level, concrete floor. Provisions for securing it should be in
position prior to placing the machine. The accuracy of any machine depends on the precise
placement of it to the mounting surface.
Level the table to within .003”/ft. (.25mm / meter) front to back and left to right.
IMPORTANT:

Maintain an adequate working area around the machine for safety.

Have the work area well illuminated with proper lighting.

Remove scrap and waste materials regularly, and make sure the work area is free from
obstructing objects.

Keep the floor free of oil and make sure it is not slippery.

If long lengths of material are to be fed into the machine, make sure that they will not
extend into any aisles.
Cleaning
Your machine may be shipped with a rustproof waxy oil coating and grease on the exposed
unpainted metal surfaces. To remove this protective coating, use a degreaser or solvent
cleaner. For a more thorough cleaning, some parts will occasionally have to be removed.
DO
NOT USE acetone or brake cleaner as they may damage painted surfaces.
Follow manufacturer’s label instructions when using any type of cleaning product. After
cleaning, wipe unpainted metal surfaces with a light coating of quality oil or grease for
protection.
WARNING:
DO NOT USE gasoline or other petroleum products to
clean the machine. They have low flash points and can explode or cause fire.
CAUTION:
When using cleaning solvents work in a well ventilated
area. Many cleaning solvents are toxic if inhaled.
GAS