Baileigh Industrial CS-350EU, Operator'S Manual

Page: 40 / 60

37
37
Storing Machine for Extended Period of Time
If the Cold Saw is to be inactive for a long period of time, prepare the machine as follows:
•
Detach the plug from the electrical supply panel.
•
Release the head return spring.
•
Empty and clean the coolant tank.
•
Clean and grease the machine.
•
Cover the machine
Note: Proper maintenance can increase the life expectancy of your machine.
Cleaning Coolant Path
Once a year or if the coolant flow is reduced, remove
the channel covers and clean the coolant flow paths.
1. Disconnect power to the saw.
1. To change the saw blade:
2. Release and pivot the mobile guard (A) by
removing the hex socket screw (B).
3. Remove the screws, covers, and gaskets from
each side of the saw guard.
4. Clean the coolant path (C) to remove all debris.
5. Install the gasket and cover and secure with the
screws. If the gasket has been damage, an RTV
type seal may be used, however do not allow
sealant to get into the coolant flow path.
6. When complete, connect the mobile guard pivot
arm.
C
B
A