background image

 

 

THANK YOU & WARRANTY 

Thank you for your purchase of a machine from Baileigh Industrial Holdings LLC. We hope that 
you find it productive and useful to you for a long time to come. 

 

Inspection  &  Acceptance.

 

Buyer  shall  inspect  all  Goods  within  ten  (10)  days  after  receipt  thereof.  Buyer’s 

payment shall constitute final acceptance of the Goods and shall act as a wai

ver of the Buyer’s rights to inspect or 

reject  the  goods  unless  otherwise  agreed.  If  Buyer  rejects  any  merchandise,  Buyer  must  first  obtain  a  Returned 

Goods Authorization (“RGA”) number before returning any goods to Seller. Goods returned without an RGA will be 
refused.  Seller  will  not  be  responsible  for  any  freight  costs,  damages  to  goods,  or  any  other  costs  or  liabilities 
pertaining to goods returned without a RGA. Seller shall have the right to substitute a conforming tender. Buyer will 
be  responsible  for  all  freight  costs  to  and  from  Buyer  and  repackaging  costs,  if  any,  if  Buyer  refuses  to  accept 
shipment.  If  Goods  are  returned  in  unsalable  condition,  Buyer  shall  be  responsible  for  full  value  of  the  Goods. 
Buyer may not return any special-order Goods. Any Goods returned hereunder shall be subject to a restocking fee 
equal to 30% of the invoice price. 
 

Specifications.

 Seller may, at its option, make changes in the designs, specifications or components of the Goods 

to improve the safety of such Goods, or if 

in Seller’s judgment, such changes will be beneficial to their operation or 

use. Buyer may not make any changes in the specifications for the Goods unless Seller approves of such changes 
in writing, in which event Seller may impose additional charges to implement such changes. 
 

Limited  Warranty.

  Seller  warrants  to  the  original  end-user  that  the  Goods  manufactured  or  provided  by  Seller 

under this Agreement shall be free of defects in material or workmanship for a  period  of twelve (12) months from 
the  date  of  purchase,  provided  that  the  Goods  are  installed,  used,  and  maintained  in  accordance  with  any 
instruction  manual  or  technical  guidelines  provided  by  the  Seller  or  supplied  with  the  Goods,  if  applicable.  The 
original end-user must give written notice to Seller of any suspected defect in the Goods prior to the expiration of 
the  warranty  period.  The  original  end-user  must  also  obtain  a  RGA  from  Seller  prior  to  returning  any  Goods  to 
Seller for warranty service under this paragraph. Seller will not accept any responsibility for Goods returned without 
a RGA. The original end-user shall be responsible for all costs and expenses associated with returning the Goods 
to Seller for warranty service. In the event of a defect, Seller, at its sole option, shall repair or replace the defective 
Goods  or  refund  to  the  original  end-user  the  purchase  price  for  such  defective  Goods.  Goods  are  not  eligible  for 
replacement  or  return  after  a  period  of  1

0  days  from  date  of  receipt.  The  foregoing  warranty  is  Seller’s  sole 

obligation, and the original end-

user’s exclusive remedy, with regard to any defective Goods. This limited warranty 

does not apply to: (a) die sets, tooling, and saw blades; (b) periodic or routine maintenance and setup, (c) repair or 
replacement of the Goods due to normal wear and tear, (d) defects or damage to the Goods resulting from misuse, 
abuse,  neglect,  or  accidents,  (f)  defects  or  damage  to  the  Goods  resulting  from  improper  or  unauthorized 
alterations,  modifications,  or  changes;  and  (f)  any  Goods  that  has  not  been  installed  and/or  maintained  in 
accordance with the instruction manual or technical guidelines provided by Seller. 
 

EXCLUSION OF OTHER  WARRANTIES.

 THE FOREGOING LIMITED WARRANTY IS IN  LIEU OF ALL  OTHER 

WARRANTIES,  EXPRESS  OR  IMPLIED.  ANY  AND  ALL  OTHER  EXPRESS,  STATUTORY  OR  IMPLIED 
WARRANTIES,  INCLUDING  BUT  NOT  LIMITED  TO,  ANY  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS 
FOR  ANY  PARTICULAR  PURPOSE  ARE  EXPRESSLY  DISCLAIMED.  NO  WARRANTY  IS  MADE  WHICH 
EXTENDS BEYOND THAT WHICH IS EXPRESSLY CONTAINED HEREIN. 
 

Limitation  of  Liability.

  IN  NO  EVENT  SHALL  SELLER  BE  LIABLE  TO  BUYER  OR  ANY  OTHER  PARTY  FOR 

ANY  INCIDENTIAL,  CONSEQUENTIAL  OR  SPECIAL  DAMAGES  (INCLUDING,  WITHOUT  LIMITATION,  LOST 
PROFITS OR DOWN TIME) ARISING FROM OR IN MANNER CONNECTED WITH THE GOODS, ANY BREACH 
BY  SELLER  OR  ITS  AGENTS  OF  THIS  AGREEMENT,  OR  ANY  OTHER  CAUSE  WHATSOEVER,  WHETHER 

BASED ON CONTRACT, TORT OR ANY OTHER THEORY OF LIABILITY. BUYER’S REMEDY WITH RESPECT 
TO  ANY  CLAIM  ARISING  UNDER  THIS  AGREEMENT  IS  STRICTLY  LIMITED  TO  NO  MORE  THAN  THE 
AMOUNT PAID BY THE BUYER FOR THE GOODS. 
 
 
 

Summary of Contents for CS-350EU





























































Reviews: