Instruction 24-9395
1
Fyrite Pro
1.0 INTRODUCTION
1.1 The Fyrite Pro
The Fyrte Pro seres of nstruments are hand-held analyzers that are
desgned for on-demand samplng of resdental furnaces and applances.
The more advanced models can also to used to check combuston effcency
by measurng the stack temperature and the percent oxygen level n the
flue-gas stream.
The Fyrte Pro s completely upgradeable from the very smple Model 100
that measures only carbon monoxde, to the Model 125 that measures
carbon monoxde (CO), oxygen (O
2
), draft, dfferental pressure, ambent
ar temperature, stack temperature, and combuston ar temperature, as
well as calculatng combuston effcency, excess ar, carbon doxde (CO
2
),
dfferental temperature, and CO ar free.
Ths manual contans nformaton on all models of the Fyrte Pro. Please
dsregard any nformaton that does not pertan to your model.
WARNINGS!
This analyzer is not intended to be used on a continuous
basis.
This analyzer does not have an audible alarm, and is not
intended to be used as a safety device.
Except for battery replacement, this analyzer should only be
opened and serviced by authorized personnel.
When testing an appliance, a full visual inspection of the
appliance should be carried out to ensure its safe operation.
Summary of Contents for 100
Page 6: ...Fyrite Pro Instruction 24 9395 iv Notes...
Page 22: ...Instruction 24 9395 16 Fyrite Pro Notes...
Page 46: ...Instruction 24 9395 40 Fyrite Pro Notes...
Page 58: ...Instruction 24 9395 52 Fyrite Pro Figure 5 4 Case Components Plumbing Schematic...
