Instruction 24-9395
28
Fyrite Pro
4.9 Clearing Saved Test Data
(Model 105/110/120/125)
Clear all saved test data as follows:
Note:
If no test data has been saved, the option to clear
memory will not be available.
1. Wth the analyzer n ts Run Mode, press the
hOlD
button
twice
to
dsplay the Prnt Screen.
2. Press the
or
button to scroll to the Clear Screen, and then press
eNTeR
to dsplay the Clear All Screen.
3. Press
eNTeR
agan to clear memory and return to the Hold Mode, or
press
hOlD
to return to the Hold Mode wthout clearng memory.
4.10 Turning OFF the Analyzer & CO Purge
Press the
I/O
button to turn OFF the analyzer. The unt wll count down
from 5 before turnng OFF, thus allowng tme for the operator to abort the
turn OFF process by pressng the
eNTeR
button.
If a hgh CO level s detected at turn OFF, the unt wll reman ON wth
ts pump runnng and dsplay “PUrG CO”. The countdown from 5 wll not
begn untl the detected CO level drops below 50 ppm. Although not recom-
mended, the purgng process can be bypassed by pressng the
I/O
button a
second tme.
Summary of Contents for 100
Page 6: ...Fyrite Pro Instruction 24 9395 iv Notes...
Page 22: ...Instruction 24 9395 16 Fyrite Pro Notes...
Page 46: ...Instruction 24 9395 40 Fyrite Pro Notes...
Page 58: ...Instruction 24 9395 52 Fyrite Pro Figure 5 4 Case Components Plumbing Schematic...
