Baby Trend FB58944 User Manual Download

Page: 1 / 48

Convenience through innovation and thoughtful design

1-800-328-7363

(8:00am ~ 4:30pm PST)

www.babytrend.com

Baby Trend, Inc.

1607 S. Campus Ave.,

Ontario, CA 91761

Carefully read and understand all instructions and warnings in

this manual. Failure to properly use this Car Seat increases the

risk of SERIOUS INJURY or DEATH in a sudden stop or crash.

KEEP INSTRUCTIONS FOR FUTURE USE.

Store this manual in the pocket provided

on the side of the car seat base.

OWNER’S MANUAL

Para instrucciones en Español, conéctese a

www.babytrend.com o llamar al: 1-800-328-7363.

Car Seat

Convenience through innovation and thoughtful design

www.babytrend.com

EFB58FF0114U

FF0301D0114

WARNING

Store this manual in the pocket provided

on the side of the Car Seat Base.

Stage

Toddler Car Seat

with Built-in

Harness

Stage

High-back Booster

Car Seat

Stage

Backless Booster

Car Seat

Carefully read and understand all instructions and warnings in

this manual. Failure to properly use this Car Seat increases the

risk of SERIOUS INJURY or DEATH in a sudden stop or crash.

KEEP INSTRUCTIONS FOR FUTURE USE.

Store this manual in the pocket provided on the back of the seat.

OWNER’S MANUAL

Para instrucciones en Español, conéctese a

www.babytrend.com o llamar al: 1-800-328-7363.

Car Seat

Convenience through innovation and thoughtful design

www.babytrend.com

WARNING

Stage

Toddler Car Seat

with Built-in

Harness

Stage

High-back Booster

Car Seat

Stage

Backless Booster

Car Seat

Summary of Contents for FB58944

















































Search results

Summary of Contents for FB58944

Reviews:

Related manuals for FB58944

Brands by name

Popular brands

Baby Trend FB58944, Owner'S Manual

Search results

Summary of Contents for FB58944

Reviews:

Related manuals for FB58944

Brands by name

Popular brands