![background image](http://html1.mh-extra.com/html/baby-lock/destiny-ii/destiny-ii_manual_3295905122.webp)
SEWING THE STITCHES
120
d
Sew two rows of straight stitches parallel to
the seam line, then trim excess thread
leaving 50 mm (approx. 1-15/16 inches).
a
Seam line
b
10 to 15 mm (approx. 3/8 inch to 9/16 inch)
c
About 50 mm (approx. 1-15/16 inches)
e
Pull the bobbin threads to obtain the
desired amount of gather, then tie the
threads.
f
Smooth the gathers by ironing them.
g
Sew on the seam line and remove the
basting stitch.
Flat Fell Seam
Use for reinforcing seams and finishing edges
neatly.
a
Select
and attach presser foot “J”.
b
Sew the finish line, then cut half of the seam
allowance from the side on which the flat
fell seam will lie.
*
When the automatic thread cutting and automatic
reinforcement stitching are preset, reverse stitches
will be sewn automatically at the beginning of
sewing. Press the “Reinforcement Stitch” button to
sew a reinforcement stitch and trim the thread
automatically at the end of sewing.
a
About 12 mm (approx. 1/2 inch)
b
Wrong side
c
Spread the fabric out along the finish line.
a
Finish line
b
Wrong side
d
Lay both seam allowances on the side of the
shorter seam (cut seam) and iron them.
a
Wrong side
e
Fold the longer seam allowance around the
shorter one, and sew the edge of the fold.
a
Wrong side
Summary of Contents for Destiny II
