Baby Lock Destiny II, Manual

Page: 54 / 198

LOWER THREADING
52
Winding the Bobbin
■
Using the Supplemental Spool Pin
With this machine, you can wind the bobbin during
sewing. While using the main spool pin to sew
embroidery, you can conveniently wind the bobbin
using the supplemental spool pin.
a Supplemental spool pin
a
Turn the main power to ON and open the
top cover.
b
Align the groove in the bobbin with the
spring on the bobbin winder shaft, and set
the bobbin on the shaft.
a
Groove in the bobbin
b Spring on the shaft
c
Set the supplemental spool pin in the “up”
position.
a
Supplemental spool pin
d
Place the spool of thread on the
supplemental spool pin, so that thread
unrolls from the front. Push the spool cap
onto the spool pin as far as possible to
secure the thread spool.
a
Spool cap
b
Spool pin
c Thread spool
LOWER THREADING
CAUTION
• The included bobbin was designed specifically
for this sewing machine. If bobbins from other
models are used, the machine will not operate
correctly. Use only the included bobbin or
bobbins of the same type (part code: X52800-
120). X52800-120 is Class 15 type bobbin.
* Actual size
a
This model
b Other models
c
11.5 mm (approx. 7/16 inch)