![background image](http://html1.mh-extra.com/html/baby-lock/destiny-ii/destiny-ii_manual_3295905090.webp)
STITCH SETTINGS
88
When you select a stitch, your machine automatically selects the appropriate stitch width, stitch length,
and upper thread tension. However, if needed, you can change any of the individual settings.
Setting the Stitch Width
Follow the steps below when you want to change
the zigzag stitch pattern width.
Example:
Press
to narrow the zigzag stitch pattern
width.
→
The value in the display gets smaller.
Press
to widen the zigzag stitch pattern width.
→
The value in the display gets bigger.
STITCH SETTINGS
Note
• Settings for some stitches cannot be changed (refer to the “STITCH SETTING CHART” at the end of
this manual).
• If you turn off the machine or select another stitch without saving stitch setting changes (“Saving Your
Stitch Settings” on page 113), the stitch settings will return to their default settings.
Memo
• For an alternate method of changing the
stitch width using the speed controller, see
page 131.
Memo
• Press
to save the stitch settings.
• Press
to check changes made to the
stitch.
• Press
to return the stitch width to the
original setting.
Note
• After adjusting the stitch width, slowly
rotate the handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the needle
may bend or break.
Summary of Contents for Destiny II
