CONNECTING THE ACCESSORY TO THE MACHINE
46
Using USB Media
When sending or reading patterns using the USB
media, connect the device to the USB port.
a
USB port
b
USB media
Connecting the Machine to the
Computer
Using the included USB cable, the sewing
machine can be connected to your computer.
Refer to “Connecting Your Machine to the PC” on
page 187 for the available computer operating
systems.
a
USB port for computer
b
USB cable connector
CONNECTING THE ACCESSORY TO THE MACHINE
Memo
• USB media is widely used, however some
USB media may not be usable with this
machine. Please visit our website for a
detailed listing of approved USB media
devices.
• Depending on the type of USB media being
used, either directly plug the USB device
into the machine’s USB port or plug the
USB media Reader/Writer into the
machine’s USB port.
Note
• The connectors on the USB cable can only
be inserted into a port in one direction. If it
is difficult to insert the connector, do not
insert it with force. Check the orientation of
the connector.
• For details on the position of the USB port
on the computer (or USB hub), refer to the
instruction manual for the corresponding
equipment.
Summary of Contents for Destiny II
