Baby Jogger City tour 2, Assembly Instructions Manual

Page: 11 / 28

11
FRAME
1 Unpack the stroller frame from the box
and set the wheels aside .
Unlock the stroller by pulling the auto-
lock lever .
2 Pull the lower front frame of the stroller
away from the rear legs . Then, lift the
seat back frame upwards from the
rear legs . Lastly, unfold the handlebar
upwards . The stroller will lock into
position and you will hear a click .
3 Place the stroller in the upright
position .
WARNING: Ensure that all the locking
devices are engaged before use .
FRONT WHEEL
4 Installation
• Attach front wheels by sliding them
into the front wheel mount until it
clicks . Gently pull on the front wheel to
make sure it is properly attached .
5 Removal
• While pressing the front wheel release
button, gently slide the front wheel out
of the front wheel mount .
SWIVEL FEATURE
6 Push the swivel lock button up to lock
the front wheel to a fixed position .
7 Press the swivel lock button down
to allow the front wheel assembly to
swivel .
REAR WHEELS
8 Installation
• Align the rear wheel axle with the
wheel mount on the stroller frame and
insert it into the wheel mount until it
locks into place . You will hear a click .
• Gently pull on the rear wheel to make
sure it is properly attached .
9 Removal
• While pressing down on the wheel
release button, gently slide the rear
wheel out of the wheel mount .
BRAKE
10 To lock the brakes: push the brake
lever down to engage the brakes .
11 To release the brakes: lift the brake
lever up .
WARNING: Lock the brakes before
loading and unloading your child and
whenever the stroller is not moving .
CANOPY
12 Pull forward to open canopy, push
backwards to close canopy .
13 To use the canopy extension: Pull the
extension out from under the canopy
until it snaps into place, push the
extension under the main canopy to
hide .
ADJUSTING SHOULDER STRAPS
14 From the back of the seat, undo the
fastening strip and open the pocket to
locate the plastic square stopper . Turn
stopper and pass through the openings
in the plastic board and seat fabric .
15 Reinsert stopper at seat opening
closest to child’s shoulders . Pass back
through seat fabric and plastic board .
Tug on strap to ensure stopper is
locked . Repeat on both sides .
WARNING: Avoid serious injury from
falling or sliding out . Always properly
adjust and fasten safety harness .
WARNING: Always use the crotch
strap in combination with the shoulder
straps and waist belt .
16 Slide the harness pads up to access
plastic guide on strap .
17 Hold the plastic guide and pull strap to
tighten or loosen .
USING SAFETY HARNESS
18 Insert side strap buckle into harness
buckle on both sides .
19 Insert connected harness and side
strap buckles into the sides of the
crotch buckle .
20 Press button on crotch buckle to
release .
RECLINE THE BACKREST
21 Pinch the clamp behind the backrest,
and slide it down to desired position .
22 Pull backrest down on both sides to
match the clamp position . Reverse
steps to return to the upright position .
EN