B2 HVA Series User Manual Download Page 77

Page: 77 / 106

Tan Delta

DHV0086 Rev06

Step Procedure

Art� Nr�

Connect all earthing cables

• Discharge and earth the DUT complying with local safety regulations.

• Connect earthing cable to the HVA earthing connector

• Prepare earthing for measurement

GH0522

• Connect power supply

KEK0038

Connect all HV cable connections.

• Screw the HV test lead into the HVA HV output connector

• Earth the HV cable shield

• Connect the other end of the HV test lead to the DUT

GH0584

Verify connections.

• Check that all cables are attached securely.

Configure interlock plug (only for HVA45TD and HVA34TD-1).

• Verify that the HV emergency adapter is connected

If operating with remote controls (optional):

• Connect external lamps or remote switches

(

see 3.3 External Interlock and Control on page 15)

Configure communication port.

For USB data transfer mode, insert USB flash drive

KDD0012

Turn key switch

to “ON” position.

KEC0007

The HVA system automatically boots.

• Start-up default screen appears.

Select appropriate option from default screen and proceed to appropriate

section for further instructions:

•

see 6.3.1 Running a Manual Test with Tan Delta on page 82

Summary of Contents for HVA Series











































































































Search results

Summary of Contents for HVA Series

Reviews:

Related manuals for HVA Series

Brands by name

Popular brands

B2 HVA Series, User Manual

Search results

Summary of Contents for HVA Series

Reviews:

Related manuals for HVA Series

Brands by name

Popular brands