MANHATTAN Heated Servery Counter
– 20 –
Firmly tighten the Allen screws of the sleeves with an Allen key (6 mm) (1.).
The connecting pins are fixed in place on the module to be coupled to.
Slide the springs (2.) and module connecting strips (3.) onto the
4 mounted connecting pins (3.).
Slide one sleeve each through the hole for the module connector into the
long unit side of the module to be connected to as far as possible.
Carefully push the module to be connected up to the module which is to
be connected to until the 4 connecting pins are aligned with the holes in
the aluminium corner profile in the short unit side.
Push up the module to be connected (4.) until the connecting pins are
guided as far as possible into the sleeves pushed in previously.
Firmly tighten the Allen screws of the sleeves on the connected module
with an Allen key (6 mm).
The modules are now connected to each other.
Connecting unit
Connecting unit to socket outlet
Caution!
Damage to the unit electrical system!
If the unit is not rated for the mains voltage or frequency which is available,
the unit electrical system may suffer permanent damage.
Before connecting, ensure that the mains voltage and frequency listed on
the rating plate match the corresponding values of the mains socket
outlet.
3.
4.
1.
2.
Summary of Contents for MANHATTAN MWA 3
Page 59: ......
