Vertical System
32
3.4 Adjust Scale
The vertical scale changes the vertical sensitivity(gain) for the selected channel. This sensitivy can be
adjusted in either
Fine
or
Coarse
mode.
To toggle between
Fine
and
Coarse
:
1. Press the
CH1
button.
2. Press the
F3
soft key to toggle between the adjustment modes.
• Once the desired adjustment mode is selected press the Vertical Scale to increase(
V
) or decrease(
mV
)
the scale.
Fine Adjustment
Adjust the vertical scale within a relatively smaller range to improve vertical resolution.
Use fine adjustment to improve the amplitude of waveform display to view signal
details when the amplitude of the input waveform is a bit greater than the full
scale under the current scale and the amplitude would be lower if the next scale
is used.
Coarse Adjustment
Adjust the vertical scale in a 1-2-5 step namely 2 mV/div, 5 mV/div, 10 mV/div …100 V/div.
The scale information in the channel information bar at the bottom of the screen will change accordingly
during the adjustment process. The adjustable range of the vertical scale is related to the probing ratio
currently set. By default, the probe attenuation factor is 1X and the adjustable range of the vertical scale
is from 2 mV/div to 100 V/div.
Summary of Contents for 2510B Series
Page 1: ......
Page 17: ...Introduction 17 1 5 Front Panel Figure 1 3 Front Panel ...