Introduction
20
1.7 Vertical Scale and Position
Figure 1.5
Vertical Control
Channels
Enable/disable the corresponding channel. The two channels are marked by
different colors which are also used to mark the corresponding waveforms on the
screen.
Vertical Position Button
Adjust the vertical position (offset) of selected channel’s waveform. Press
V
to
increase the offset and
mV
to decrease it. During modification, the position is
shown in the center of the display.
Pressing the
shift
+
verical scale
buttons resets the vertical offset to zero.
Vertical Scale Button
Adjust the vertical scale of the selected channel. Press
V
to increase the scale and
mV
to decrease the scale.
During modification, the amplitdue of the waveform is enlarged or reduced and the
scale information in left bottom corner of the display is updated.
Summary of Contents for 2510B Series
Page 1: ......
Page 17: ...Introduction 17 1 5 Front Panel Figure 1 3 Front Panel ...