B+K precision 2510B Series, User Manual, Page: 29 / 184

Vertical System
This chapter introduces how to configure the vertical parameters of the oscilloscope. The 2510B series
provides two analog input channels. Each channel shares the same vertical control system. Therefore,
channel 1 will be used as an example for this chapter to introduce the parameters of the vertical system.
We recommend always scaling the signal so that the entire waveform is contained
between the top and bottom of the display.
The contents of this chapter include:
3.1 Channels 29
3.2 Coupling 30
3.3 Bandwidth Limit 31
3.4 Adjust Scale 32
3.5 Probe Attenuation 33
3.6 Unit 34
3.7 Deskew 34
3.8 Invert 35
3.9 Offset 35
3.10 Trace 36
3.1 Channels
Pressing the Channels keys in the vertical control area will enable the selected channel.
After enabling a channel the channel’s setting menu and the channel information bar will be displayed
at the bottom of the screen. Modify the parameters available according to the input signal to make the
waveform display easy to observe and measure.
To turn off the channel, press the channel button twice.
To turn off the channel, press the channel button twice.