Measure Logger
179
19.3 Display Control
To enter the
Measure Logger Display
menu (shown in
) press the
softkey while in the
Figure 19.4
Measure Logger Display
19.3.1 Vertical Scale
Press the
softkey to adjust the vertical scale. Once
Vertical Scale
is selected use the
to increase/decrease the vertical scale of all active traces.
The vertical scale can also be configured using the vertical scale buttons on the front panel.
19.3.2 Horizontal
Press the
softkey to enter the
Horizontal Control
menu shown in
Figure 19.5
Measure Logger Horizontal Control
In the
Horizontal Control
menu users can manipulate the logger trace in order to customize the display
according to their needs, or utilize the
Auto Set
function to restore the default state whenever desired.
To zoom and move the logger trace and set the horizontal reference position, follow these steps:
Step 1.
Press the
softkey or use the horintal scale button to adjust the scale of the logger trace.
– This control allow users to zoom in and out of all enabled traces.
Step 2.
Press the
softkey or use the horintal position button to adjust the position of all trace.
– This control allow users to move the enabled traces horizontally across the screen.
Step 3.
Press the
softkey to adjust the horizontal reference position. This control allows users to
set a specific horizontal reference point on the trace to either
Center
or
Right
.
Auto Set
(
softkey) is designed to restore the logger trace to its default
state. By pressing it, users can revert any changes made to the zoom level,
position, or reference point and return to the initial settings
Summary of Contents for 2510B Series
Page 1: ......
Page 17: ...Introduction 17 1 5 Front Panel Figure 1 3 Front Panel ...