Serial Trigger and Decode
100
6.4.2 CAN Trigger
To Configure the CAN trigger:
Step 1.
Press the
button to enter the
Trigger
function menu.
Step 2.
Press the
softkey to select
Type
.
• Use the
to select
Serial
.
Step 3.
Press the
softkey to select
Protocol
.
• Use the
to select
CAN
.
Step 4.
Press the
softkey to enter the
Trigger Setting
menu.
Figure 6.15
CAN Trigger Menu
a. Press the
softkey to select a
Condition
.
Step 5.
If
Remote
,
ID
, or
ID + Data
condition was selected:
a. Press the
softkey
• Use the
to set the ID’s value.
b. Press the
softkey set the length of ID (11bits or 29 bits).
c. Press the
softkey and use the Universal Knob to select the byte that you want to set.
d. For
ID + Data
press the
softkey to view the second menu page.
• Press the
softkey and use the
to set the value of the first byte.
In order to make it convenient for the operation, ID is split into several bytes. For
example, if the ID’s length is 11 bits, it will be split into two bytes, a byte includes
8 bits. If “1st byte” is selected, only the 8 least significant bits can be changed.
Summary of Contents for 2510B Series
Page 1: ......
Page 17: ...Introduction 17 1 5 Front Panel Figure 1 3 Front Panel ...