B+B SmartWorx V3, Configuration Manual

Page: 97 / 112

5. CUSTOMIZATION
There are for example these user’s modules available. User modules can be downloaded
from web pages www.conel.cz or can be custom-programmed.
Module name Description
MODBUS TCP2RTU Provides a conversion of MODBUS TCP/IP protocol to MDBUS
RTU protocol, which can be operated on the serial line.
Easy VPN client Provides secure connection of LAN network behind our router
with LAN network behind CISCO router.
NMAP Allows to do TCP and UDP scan.
Daily Reboot Allows to perform daily reboot of the router at the specified time.
HTTP Authentication Adds the process of authentication to a server that doesn’t pro-
vide this service.
BGP, RIP, OSPF Add support of dynamic protocols.
PIM SM Adds support of multicast routing protocol PIM-SM.
WMBUS Concentrator Allows to receive messages from WMBUS meters and saves
contents of these messages to XML file.
pduSMS Sends short messages (SMS) to specified number.
GPS Allows router to provide location and time information in all
weather, anywhere on or near the Earth, where there is an un-
obstructed line of sight to four or more GPS satellites.
Pinger Allows to manually or automatically verify the functionallity of
the connection between two network interfaces (ping).
IS-IS Add support of IS-IS protocol.
Table 69: User modules
Attention, in some cases the firmware update can cause the incompatibility of used user
modules. Some of them are are dependent on the version of linux kernel (e.g. SmsBE and
PoS Configuration ). It is recommended to update user modules to the most recent version.
Information about the user module and the firmware compatibility is at the beginning of the
user module’s Application Note.
88