B+B SmartWorx V3, Configuration Manual

Page: 46 / 112

4. CONFIGURATION
4.6 Backup Routes
Using the configuration form on the Backup Routes page can be set backing up primary
connection by other connections to internet/mobile network. For each back up connection can
be defined a priority. Own switching is done based on set priorities and state of the connection
(for
Primary LAN and Secondary LAN ).
If
Enable backup routes switching
option is checked, the default route is selected accord-
ing to the settings below. Namely according to status of enabling each of backup route (i.e.
Enable backup routes switching for Mobile WAN , Enable backup routes switching for PPPoE ,
Enable backup routes switching for WiFi STA , Enable backup routes switching for Primary
LAN or Enable backup routes switching for Secondary LAN ), according to explicitly set pri-
orities and according to status of connection check (if it is enabled). In addition, network
interfaces belonging to individual backup routes have checked a flag RUNNING. This check
fixes for example disconnecting of an ethernet cable.
Attention! If you want to use connection to mobile WAN as one of the backup routes, it is
necessary to enable Check Connection at Mobile WAN configuration to bind option,
see chapter 4.2.1.
Figure 24: Backup Routes
37